Building Autonomous Robotics Systems Without Motion Capture

Massachusetts Institute of Technology researchers just dropped something wild; a system that lets robots learn how to control themselves just by watching their own movements with a camera. No fancy sensors. No hand-coded models. Just vision. Think about that for a second. Right now, most robots rely on precise digital models to function - like a blueprint telling them exactly how their joints should bend, how much force to apply, etc. But what if the robot could just... figure it out by experimenting, like a baby flailing its arms until it learns to grab things? That’s what Neural Jacobian Fields (NJF) does. It lets a robot wiggle around randomly, observe itself through a camera, and build its own internal "sense" of how its body responds to commands. The implications? 1) Cheaper, more adaptable robots - No need for expensive embedded sensors or rigid designs. 2) Soft robotics gets real - Ever tried to model a squishy, deformable robot? It’s a nightmare. Now, they can just learn their own physics. 3) Robots that teach themselves - instead of painstakingly programming every movement, we could just show them what to do and let them work out the "how." The demo videos are mind-blowing; a pneumatic hand with zero sensors learning to pinch objects, a 3D-printed arm scribbling with a pencil, all controlled purely by vision. But here’s the kicker: What if this is how all robots learn in the future? No more pre-loaded models. Just point a camera, let them experiment, and they’ll develop their own "muscle memory." Sure, there are still limitations (like needing multiple cameras for training), but the direction is huge. This could finally make robotics flexible enough for messy, real-world tasks - agriculture, construction, even disaster response. #AI #MachineLearning #Innovation #ArtificialIntelligence #SoftRobotics #ComputerVision #Industry40 #DisruptiveTech #MIT #Engineering #MITCSAIL #RoboticsResearch #MachineLearning #DeepLearning

Real autonomy begins where networks fail. Watney Robotics Inc has achieved what many called impossible — continuous robotic operation without human intervention. Their system runs 24/7, detecting and correcting edge-case errors locally, without reboot or downtime. The real innovation lies in how they built it: a Rust-based control architecture designed for deterministic performance under packet loss and latency. Even when the network struggles, motion prediction and local control keep the robot precisely on path. High-level intelligence runs in the cloud, while real-time decisions stay at the edge. This hybrid design makes robots lighter, faster, and globally scalable — without compromising precision. It’s not the next step in automation. It’s the moment autonomy becomes resilient. AgileX Robotics

🌑🌑Navigation In Complete Darkness Using A Monocular Camera🌑🌑 Check out our latest work, "AsterNav: Autonomous Aerial Robot Navigation In Darkness Using Passive Computation," published in the IEEE Robotics and Automation Letters (IEEE RA-L) by Deepak Singh and Shreyas Khobragade, where we use nature-inspired custom apertures to obtain passive depth cues for accurate metric depth estimation using a cheap Raspberry Pi camera. No REAL data or Calibration NEEDED! #sim2real #computationalimaging Code is Open-Source! The paper videos are shot at max ISO using 8000$ filming setup from Nikon! 📄 PDF: https://lnkd.in/gACQnWBn 🌎 Project Website: https://lnkd.in/gaUxxta2 💻 Code: https://lnkd.in/gtXVzjic 📹 Full Video: https://lnkd.in/gSXH5VyD Autonomous aerial navigation in absolute darkness is crucial for post-disaster search and rescue operations, which often occur from disaster-zone power outages. Yet, due to resource constraints, tiny aerial robots, perfectly suited for these operations, are unable to navigate in the darkness to find survivors safely. In this paper, we present an autonomous aerial robot for navigation in the dark by combining an Infra-Red (IR) monocular camera with a large-aperture coded lens and structured light without external infrastructure like GPS or motion-capture. Our approach obtains depth-dependent defocus cues (each structured light point appears as a pattern that is depth dependent), which acts as a strong prior for our AsterNet deep depth estimation model. The model is trained in simulation by generating data using a simple optical model and transfers directly to the real world without any fine-tuning or retraining. AsterNet runs onboard the robot at 20 Hz on an NVIDIA Jetson Orin Nano. Furthermore, our network is robust to changes in the structured light pattern and relative placement of the pattern emitter and IR camera, leading to simplified and cost-effective construction. We successfully evaluate and demonstrate our proposed depth navigation approach AsterNav using depth from AsterNet in many real-world experiments using only onboard sensing and computation, including dark matte obstacles and thin ropes (diameter 6.25mm), achieving an overall success rate of 95.5% with unknown object shapes, locations and materials. To the best of our knowledge, this is the first work on monocular, structured-light-based quadrotor navigation in absolute darkness. P.S. Shreyas Khobragade is on the job market! Hire him :) Kudos to Deepak Singh, Shreyas Khobragade for the amazing work. #pearwpi Worcester Polytechnic Institute #dronesforgood #searchandrescue #SAR

Teaching robots to build simulations of themselves allows the robot to detect abnormalities and recover from damage. We naturally visualize and simulate our own movements internally, enhancing mobility, adaptability, and awareness of our environment. Robots have historically been unable to replicate this visualization, relying instead on predefined CAD models and kinematic equations. Free Form Kinematic Self-Model (FFKSM) allows the 𝗿𝗼𝗯𝗼𝘁 𝘁𝗼 𝘀𝗶𝗺𝘂𝗹𝗮𝘁𝗲 𝗶𝘁𝘀𝗲𝗹𝗳: 1) Robots autonomously learn from their morphology, kinematics, and motor control directly from 𝗯𝗿𝗶𝗲𝗳 𝗿𝗮𝘄 𝘃𝗶𝗱𝗲𝗼 𝗱𝗮𝘁𝗮 -> Like humans observing their reflection in a mirror 2) Robots perform precise 3D motion planning tasks 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝗽𝗿𝗲𝗱𝗲𝗳𝗶𝗻𝗲𝗱 𝗸𝗶𝗻𝗲𝗺𝗮𝘁𝗶𝗰 𝗲𝗾𝘂𝗮𝘁𝗶𝗼𝗻𝘀 -> Simplifies complex manipulation and navigation tasks 3) Robots 𝗮𝘂𝘁𝗼𝗻𝗼𝗺𝗼𝘂𝘀𝗹𝘆 𝗱𝗲𝘁𝗲𝗰𝘁 morphological changes or damage and rapidly recover by retraining with new visual feedback -> Significantly enhances resilience. The model is also 𝗵𝗶𝗴𝗵𝗹𝘆 𝗲𝗳𝗳𝗶𝗰𝗶𝗲𝗻𝘁, requiring minimal memory resources of just 333kB, making it broadly applicable for resource constrained robotic systems. 𝗧𝗵𝗶𝘀 𝗶𝘀 𝗮𝗹𝘀𝗼 𝘁𝗵𝗲 𝗳𝗶𝗿𝘀𝘁 𝗺𝗼𝗱𝗲𝗹 𝘁𝗼 𝗮𝗰𝗵𝗶𝗲𝘃𝗲 𝘀𝘂𝗰𝗵 𝗰𝗼𝗺𝗽𝗿𝗲𝗵𝗲𝗻𝘀𝗶𝘃𝗲 𝘀𝗲𝗹𝗳-𝘀𝗶𝗺𝘂𝗹𝗮𝘁𝗶𝗼𝗻 𝘂𝘀𝗶𝗻𝗴 𝗼𝗻𝗹𝘆 𝟮𝗗 𝗥𝗚𝗕 𝗶𝗺𝗮𝗴𝗲𝘀, 𝗲𝗹𝗶𝗺𝗶𝗻𝗮𝘁𝗶𝗻𝗴 𝗰𝗼𝗺𝗽𝗹𝗲𝘅 𝗱𝗲𝗽𝘁𝗵-𝗰𝗮𝗺𝗲𝗿𝗮 𝘀𝗲𝘁𝘂𝗽𝘀 𝗮𝗻𝗱 𝗶𝗻𝘁𝗿𝗶𝗰𝗮𝘁𝗲 𝗰𝗮𝗹𝗶𝗯𝗿𝗮𝘁𝗶𝗼𝗻𝘀. I believe the next phase of robotic automation inevitably comes with self-awareness of robots. Self-reflection is a major part of how we as humans improve upon ourselves; as 'general purpose robots' emerge, so would their self-reflection. This enables robots to continuously monitor and update their internal models, thereby refining their performance in real time. This is a huge step towards robot self-awareness! Congratulations to Yuhang Hu, Jiong Lin, and Hod Lipson on this impressive advancement! Paper link: https://lnkd.in/gJ-bkU8N I post the latest and interesting developments in robotics—𝗳𝗼𝗹𝗹𝗼𝘄 𝗺𝗲 𝘁𝗼 𝘀𝘁𝗮𝘆 𝘂𝗽𝗱𝗮𝘁𝗲𝗱!