LeetCode Binary Search Challenge: Solved Search in Rotated Sorted Array II

🚀 Day 22 of #100DaysOfCode Solved 34. Find First and Last Position of Element in Sorted Array on LeetCode 🔍 🧠 Key insight: To find both boundaries of a target in a sorted array, a single binary search isn’t enough. Running two binary searches—one for the leftmost and one for the rightmost occurrence—gives an optimal solution. ⚙️ Approach: 🔹Perform a binary search to find the first occurrence 🔹Perform another binary search to find the last occurrence 🔹Adjust search boundaries after finding the target to expand left/right ⏱️ Time Complexity: O(log n) 📦 Space Complexity: O(1) #100DaysOfCode #LeetCode #DSA #BinarySearch #Java #ProblemSolving #LearningInPublic #CodingJourney

🚀 Day 39 of #100DaysOfCode Solved 80. Remove Duplicates from Sorted Array II on LeetCode 🔢 🧠 Key Insight: The array is already sorted, and we need to ensure that each element appears at most twice, modifying the array in-place. ⚙️ Approach: 🔹Maintain a pointer i representing the position to place the next valid element 🔹Start iterating from index 2 🔹For each element nums[j], compare it with nums[i] 🔹If they are different, place the element at nums[i + 2] and move the pointer forward This ensures that no element appears more than twice while maintaining the sorted order. ⏱️ Time Complexity: O(n) 📦 Space Complexity: O(1) #100DaysOfCode #LeetCode #DSA #Arrays #TwoPointers #Java #ProblemSolving #InterviewPrep #LearningInPublic

🚀 Day 88- #100DaysOfCode Today I solved Peak Index in a Mountain Array using Binary Search. 🔹 Problem Idea A mountain array increases strictly and then decreases. The goal is to find the index of the peak element. 🔹 Approach Used: Binary Search Instead of checking every element (O(n)), we can use the mountain property: • If arr[mid] > arr[mid+1] → we are in the descending part, so the peak lies on the left side. • Otherwise → we are in the ascending part, so move to the right side. This helps us find the peak in O(log n) time. 📊 Time Complexity: O(log n) 📦 Space Complexity: O(1) #DSA #Java #BinarySearch #LeetCode #CodingJourney #ProblemSolving #100DaysOfCode

🚀 Day 29 of #100DaysOfCode Solved 442. Find All Duplicates in an Array on LeetCode ✅ 🧠 Key Insight: Since numbers are in the range 1 → n, each number ideally belongs at index num - 1. By repeatedly swapping elements into their correct positions (cyclic sort), duplicates naturally reveal themselves. ⚙️ Approach Used: 🔹Place each element at its correct index (nums[i] → nums[nums[i] - 1]) 🔹Skip when the element is already in the correct position 🔹After rearrangement, any index i where nums[i] ≠ i + 1 is a duplicate ⏱️ Time Complexity: O(n) 📦 Space Complexity: O(1) (excluding output list) #100DaysOfCode #LeetCode #DSA #Arrays #CyclicSort #Java #ProblemSolving #InterviewPrep #LearningInPublic

Day 27/100 – LeetCode Challenge 🚀 Problem: Sort List Approach: Applied Merge Sort on the linked list Used slow and fast pointers to find the middle Recursively sorted both halves Merged the sorted halves Time Complexity: O(n log n) Space Complexity: O(log n) (recursion stack) Key takeaway: Merge sort is the most efficient sorting technique for linked lists, as it avoids random-access operations required by other algorithms. #LeetCode #100DaysOfCode #DSA #Java #LinkedList #MergeSort #ProblemSolving

🚀 Day 38 of #100DaysOfCode Solved 154. Find Minimum in Rotated Sorted Array II on LeetCode 🔍 🧠 Key Insight: The array is sorted but rotated, and this version introduces duplicates, which makes the binary search logic slightly trickier. ⚙️ Approach: 🔹Use binary search with left and right pointers 🔹Compare nums[mid] with nums[right]: 🔹If nums[mid] > nums[right] → minimum lies in the right half 🔹If nums[mid] < nums[right] → minimum lies in the left half (including mid) 🔹If equal → safely shrink the search space by decrementing right This handles the ambiguity caused by duplicates. ⏱️ Time Complexity: Average: O(log n) Worst case: O(n) (when many duplicates exist) 📦 Space Complexity: O(1) #100DaysOfCode #LeetCode #DSA #BinarySearch #Arrays #Java #ProblemSolving #InterviewPrep #LearningInPublic

🚀 Day 24 of #100DaysOfCode Solved 167. Two Sum II – Input Array Is Sorted on LeetCode 🔢👉👈 🧠 Key insight: Because the array is already sorted, we can avoid hash maps and use a two-pointer approach to find the target sum efficiently. ⚙️ Approach: 🔹Initialize two pointers at the start and end of the array 🔹Calculate the sum of values at both pointers 🔹If the sum is too large → move the right pointer left 🔹If the sum is too small → move the left pointer right 🔹Stop when the target is found ⏱️ Time Complexity: O(n) 📦 Space Complexity: O(1) #100DaysOfCode #LeetCode #DSA #TwoPointers #Java #ProblemSolving #LearningInPublic #CodingJourney

🚀 Day 82 of #100DaysOfCode 🔍 Problem Solved: Find Minimum in Rotated Sorted Array Today I worked on a binary search based problem where we need to find the minimum element in a rotated sorted array in O(log n) time. 💡 Key Insight: If the array is already sorted (nums[low] <= nums[high]), then the first element is the minimum. Otherwise: If left half is sorted → minimum must be in right half If right half is unsorted → minimum lies there By carefully adjusting low and high, we narrow down the search space efficiently. 🧠 What I practiced: Modified Binary Search Identifying sorted halves Avoiding unnecessary comparisons #Java #DSA #BinarySearch #LeetCode #ProblemSolving #CodingJourney

Merge Sorted Array (LeetCode : 88) 💻✨ In this problem, we are given two sorted arrays. The task is to create a final sorted array inside nums1 without using extra space. I used Two Pointer Technique here 👇 🔹 i → last valid index of nums1 🔹 j → last index of nums2 🔹 k → last index of nums1 (m + n - 1) We compare from the back because if we compare from the front, the data would be overwritten. 👉 If nums1[i] > nums2[j], then we put the larger value at the back. 👉 Otherwise, we put nums2[j]. 👉 Once any one of the arrays is finished, we copy the remaining elements. Time Complexity of this approach: O(m + n) Space Complexity: O(1) (In-place solution) 🚀 This problem reminded me again — If you think in the right direction, the solution becomes much easier. #LeetCode #androidDeveloper#problemslover#dsapattern#twopointer#dailyChallenge #DSA #Java #TwoPointerTechnique #ProblemSolving #CodingJourney #SoftwareDevelopment #InPlaceAlgorithm #DataStructures #AlgorithmThinking

🚀 Day 18 of #100DaysOfCode Solved Remove Duplicates from Sorted List II on LeetCode 🔗 🧠 Key insight: When duplicates appear in a sorted linked list, we need to remove all occurrences, not just one. Using a dummy (sentinel) node makes it easier to handle cases where duplicates start at the head. ⚙️ Approach: 🔹Create a dummy node pointing to the head 🔹Traverse the list with two pointers 🔹If a duplicate sequence is found, skip the entire block 🔹Otherwise, move forward normally ⏱️ Time Complexity: O(n) 📦 Space Complexity: O(1) #100DaysOfCode #LeetCode #DSA #LinkedList #Java #ProblemSolving #LearningInPublic #CodingJourney